Design of Adaptive Control System Based on Model Reference Stick Slip Vibration
Huang Xun
Shaanxi University of Science and Technology, Xi’an, 710021, China.
Yang Xiao *
Shaanxi University of Science and Technology, Xi’an, 710021, China.
Li Jianghong
Northwestern Polytechnical University, Xi’an, 710072, China.
Li Changhao
Shandong University, Weihai, 264209, China.
*Author to whom correspondence should be addressed.
Abstract
The stick-slip vibration is a common vibration mode of the drill string system during the drilling and it is extremely destructive. The drilling efficiency will be greatly reduced, if the drill gets a bit damaged and the drill rod breaks when the stick-slip vibration occurs. In order to solve this problem, a two-degree-of-freedom focused mass model was established. The controller based on the model reference adaptive control method was designed. The simulation experiment was completed to prove the rationality of the established stick-slip vibration model and the correctness of the control method. The control equipment was developed and the tests above on the well were completed. The experimental results shows that the designed stick-slip vibration control system has validity and stability.
Keywords: Stick-slip vibration of drill string, adaptive control, feedback control, control system, mechanical model, model reference