Main Article Content
The impact of noise due to the construction of a Steam Power Plant can have a negative impact on the surrounding environment. This study aims to assess the initial baseline condition of environmental noise before the existence of development activities, predictions after activities, and actions to manage/monitor the impact of noise that occurs. The research method is evaluative descriptive using the integrating sound level meter. The research data are the equivalent noise level (Leq), daytime noise level (LS), night noise level (LM), and day-night noise level (L-SM) from 9 sampling locations. The results of the noise analysis are categorized based on scale and compared with the Decree of the Minister of Environment of the Republic of Indonesia No. Kep-48 / MENLH / 11/1996 and IFC - EHS guidelines. Noise level data The initial environmental baseline of the laydown area utilization stage at scale 2, land clearing stage at scale 1, the construction phase of the main building, and supporting facilities at scale 1. The value of the scale of the noise level is assessed based on the difference in impact components that is smaller than the difference in the average environmental scale, so that the impact category is a manageable impact. The direction for controlling the impact of noise is to install a project guardrail, activities are carried out at 07.00-19.00 WIB and and tree planting. Environmental management and monitoring have been carried out well, the evaluation trend shows a decline.
Singh SK. Performance Evaluation of State Owned Coal based Power Plants in India; 2018.
Di Gianfrancesco A. The fossil fuel power plants technology. In: Materials for ultra-supercritical and advanced ultra-supercritical power plants. Elsevier. 2017; 1–49.
Favalier N. Environmental impact assessment of freshwater polyculture: balance between productivity and resource mobilization. INRA-UMR SAS, Agrocampus Ouest, 35000 Rennes; 2019.
Laković M, Banjac M, Jović M, Mitrović D. Coal-fired power plants energy efficiency and climate change-current state and future. Facta Univ Ser Work Living Environ Prot. 2016;217–27.
Suresh A V. Environmental, Health, and Safety Guidelines for Natural Gas Processing; 2018.
Dewi I, Kurniawan Z. Influence of Traffic Performance Againts the Noise of the Vehicles in Medan. In: Journal of Physics: Conference Series. IOP Publishing. 2018; 12022.
Fandeli C. Analisis mengenai dampak lingkungan pembangunan pelabuhan. UGM PRESS; 2018.
Zhang H, Zhang L. Analysis and Comparison of Airport Noise Metrics. In: INTER-NOISE and NOISE-CON Congress and Conference Proceedings. Institute of Noise Control Engineering. 2018;1613–21.
Saleh S, Woskie S, Bello A. The use of noise dampening mats to reduce heavy-equipment noise exposures in construction. Saf Health Work. 2017;8(2): 226–30.
Aragão FV, Soares PF, Chiroli DMG, Zola FC, Samed MMA. Mathematical optimization model for Equivalent Noise Level. Rev Téc Ing Univ Zulia. 2016; 39(6):1–9.
Zajusz-Zubek E, Kaczmarek K, Mainka A. Trace elements speciation of submicron particulate matter (PM1) collected in the surroundings of power plants. Int J Environ Res Public Health. 2015;12(10):13085–103.
Organization WH. Environmental noise guidelines for the European region; 2018.
Alías F, Socoró JC, Alsina-Pagès RM. WASN-Based Day–Night Characterization of Urban Anomalous Noise Events in Narrow and Wide Streets. Sensors. 2020; 20(17):4760.
Hustim M, Ramli MI, Nabila MF. Study of noise level at roundabouts in Maminasata area. In: IOP Conference Series: Earth and Environmental Science. IOP Publishing. 2020;12168.
Grobler N. Environmental Noise Baseline Assessment–Pure Source Mine Project in the Free State; 2018.
Kutelu BJ, Seidu SO, Eghabor GI, Ibitoye AI. Review of gtaw welding parameters. J Miner Mater Charact Eng. 2018;6(5):541–54.
Musse MA, Barona DA, Rodriguez LMS. Urban environmental quality assessment using remote sensing and census data. Int J Appl earth Obs Geoinf. 2018;71:95–108.
Fandeli C, Utami RN, Nurmansyah S. Audit Lingkungan. UGM PRESS; 2017.
Jeffus L. Welding: Principles and applications. Cengage Learning; 2020.
Szłapa P, Marczak W. Arc welding noise assessment from the measured ultrasound pressure levels. Part II: Pulsed and double pulsed metal active gas welding. Ultrasonics. 2020;100: 105976.
Cascade Power GP. Cascade Power Plant. 2019;
Chajka-Cadin L, Petrella M, Timmel C, Futcher E, Mittleman J. Federal Highway Administration Research and Technology Evaluation: National Household Travel Survey Program Final Report; 2017.
Aditya VT, Masykuri M, Setyono P. Analysis of noise in the green open space Putri Kaca Mayang, Pekanbaru City. In: AIP Conference Proceedings. AIP Publishing LLC. 2019;40020.